Deck Builders and Fence Contractors in Richmond Hill
Composite and wood decks, privacy fences, gates and railings for homes and properties across Richmond Hill, from Mill Pond and Bayview Hill to Oak Ridges and Lake Wilcox.
What we build in Richmond Hill
Richmond Hill runs from established neighbourhoods around Mill Pond and Bayview Hill up to Oak Ridges, where lots border lakes, forest and regulated natural areas.
Wood privacy fences
Pressure-treated and cedar, board-on-board, solid and horizontal.
Learn moreVinyl fences
No paint, no rot, wipes clean.
Learn moreAluminum and pool fences
Clean lines for front yards and pool enclosures.
Learn moreChain link fences
Galvanized or black vinyl-coated, for homes and businesses.
Learn moreGates
Walk and drive gates built to swing true.
Learn moreFence repair
Leaning posts, broken boards and sagging gates.
Learn moreComposite decks
Low-maintenance decks built on proper footings and framing.
Learn moreWood decks and repairs
Pressure-treated and cedar decks, resurfacing and stairs.
Learn moreRichmond Hill deck and fence rules at a glance
From the City of Richmond Hill. Rules change, so we confirm them for your address before building.
Deck permits
600 mm (about 2 ft)
A permit is needed if the deck is attached to a building, more than 600 mm (2 ft) above grade, or larger than 10 m².
Front yard fence
1.2 m (about 3 ft 11 in)
Maximum front yard fence height.
Rear and side yard fence
1.8 m (5 ft 11 in)
Maximum backyard and side yard fence height.
Conservation areas
TRCA
Properties in TRCA-regulated areas need TRCA approval first.
Sources: City of Richmond Hill, Fence bylaw, Residential deck checklist, Building permit FAQs.
Three deck permit triggers to know
Richmond Hill looks at more than height. A deck needs a permit if it's attached, higher than 600 mm (2 ft), or bigger than 10 square metres, so even a large low deck in the backyard can need one.
In Oak Ridges and around Lake Wilcox, many properties sit in areas regulated by the Toronto and Region Conservation Authority. We check before designing.
Neighbourhoods and communities we serve
- Mill Pond
- Bayview Hill
- Oak Ridges
- Lake Wilcox
- Jefferson
- Westbrook
- Rouge Woods
- Langstaff
- Crosby
- Elgin Mills
- Richmond Hill Village
Also serving nearby Markham, Vaughan, Aurora and North York, and the rest of York Region.
2 projects in Richmond Hill
Real jobs with sizes, materials and photos. Every one of these is a page you can read in full.
180 ft of 6 ft privacy fence with two gates
About 180 linear feet of 6 ft pressure-treated board privacy fence replacing a grey, leaning fence around a Richmond Hill backyard, with two new gates.
View project500 sq ft pool deck built up to an above-ground pool
A 500 square foot pressure-treated deck built out around an above-ground pool in Richmond Hill, taken up to the pool wall so the pool sits in the deck rather than on the lawn, and tied into the existing deck at the house.
View projectRichmond Hill deck and fence questions
My deck will be low but large. Do I need a permit in Richmond Hill?
How tall can a corner-lot fence be in Richmond Hill?
How do I get a deck or fence quote in Richmond Hill?
Building in Richmond Hill?
Send your address, photos of the yard and what you have in mind.